Normally you cannot assign drive letter to Tape drive. By using LTFS, you will be able to assign drive letter to LTO tape drive.
Users are dealing with the media like Hard disk, CD/DVD/BD disks, floppy disks etc. In MS windows environment, a Drive Letter is assigned to accesses these media. In *NIX environment, these drives get access by mounting to mount point.
Here arises the question. Why cannot we use Tape drive in the same manner as we use other drives i.e by assigning the drive letter in MS Windows? Tape drive is one of the oldest storage mediums, while USB/SSD based drives are recent ones. One can access USB/SSD by assigning drive letters, but for tape it cannot be done (normally) …why?
To get answer,consider the following points:
(1) The way data being stored thus accessed on Tape drive is different then HDD/CD/DVD. In tape drive, data access is Linear or Sequential while in other drives it is Random.
(2) The way Meta information, for data access purpose is stored on the media. While HDD, CD/DVD and other media starts storing the information about their files and folders at beginning of disk (In case of HDD it may be in form of FAT/NTFS area, Root directory etc and in case of CD/DVD it is in form of TOC in lead-in area). This arrangement facilitates random access, thus assigning drive letter serves its purpose of Single point of reference. Tape doesn't have such Meta information for all of its data at the beginning. The file name, location etc information of file and folders is spread out, throughout the tape, stored normally at the end of each data block. To get list of files and folders in tape, all data blocks need to be accessed that too in linear way and then at the end of each data block, such information can be found. There is no such consolidated index of stored data in tape , no Single point of reference. Only tape backup/restore software creates such information after scanning the whole tape and stores in their own database..Above all, being the proprietary in nature, the tape drive get accessed and controlled by their special drivers and application software, which only can communicate and control tape drive. Windows cannot access tape as Nativity as it accesses other drives, thus eliminates the drive letter assignment.
The Tape industry is quite aware about it since long. Finally, the open source"Linear tape file system", LTFS is arrived in March 2011. Note that LTFS is not a panacea , it has limitations too: It works with LTO drivers only , that too with LTO-5 onward in full fledge manner. LTFS permits user to assign a drive letter to tape drive in windows and access the tape data in same manner as of HDD, CD/DVD or any other random access drive.
" The Linear Tape File System is a method of storing file metadata on a separate part of the tape. This makes it possible to copy and pastefiles or directories to a tape as if it were just like another disk, but does not change the fundamental sequential access nature of tape."
So if you have tape drive which is not LTO, you have to access it in the same way as you are doing now. But if you are planning to go for LTO-5 and onwards you can access it by assigning drive letter to it using LTFS.
Post Your Comments....